3 YEARS OF PRIDE DELIVERED!
PRO 36 offers superlative results in every coating performance category yet applies quickly and easily. With proper preparation, PRO 36 will yield up to 3 years of hardened, hydrophobic protection while your car exhibits an intense candy apple shine.
Our 3 Year Coating System
- 3 Years of Hydrophobic Protection
- Effortless, Single-Layer Application
- Diamond Hard Scratch Resistance
- Offers a Slick-Feeling, Intense Candy Apple Shine
Application Instructions
PRECAUTIONS
- Apply in temperatures between 10-30°C, 50-90°F.
- Apply in a closed, well ventilated indoor area with air humidity not exceeding 70%.
- Wear protective gloves.
- Use fresh applicators & microfiber towels for application of additional layers (do not use previously used towels).
WHAT YOU’LL NEED
- 2 Microfiber Towels
- 2 Applicators
- Protective Gloves
- DIAMOND BODY PREP
APPLICATION TIPS
- If applying in high heat or humidity lower time between application and removal. Test over a small area to determine appropriate time to let the coating bond to the surface.
- Apply PRO 36 to body, headlights, rubber, and metal trim.
- As the coating bonds to the surface a haze will appear. This indicates coating is ready to remove. If product dries on the surface or is difficult to remove, re-wet the area with more product and immediately buff off.
- If a second layer is desired, allow to cure for 1 hour before application.
INSTRUCTIONS
- Wash, polish and treat the areas to be coated with Diamond Body Prep.
- Shake Diamond Pro 36 well for 15 seconds.
- Place 15 drops on an applicator, and apply to 1-2 sections of the car in a crosshatch fashion.
- Wait 5-10 mins watching for a haze to appear, then gently buff the treated areas and buff off excess with a low-nap microfiber towel.
- Allow to cure for 1 hour before using the vehicle.
- 3 Years of Hydrophobic Protection
- Effortless, Single-Layer Application
- Diamond Hard Scratch Resistance
- Offers a Slick-Feeling, Intense Candy Apple Shine
