10 YEARS OF BEAUTIFUL PROTECTION
PRO 120 is a multi-stage, top-of-the-line nanodiamond coating. Utilizing our most sophisticated pairing of enriched nanodiamond composites, PRO 120 creates immense protection, scratch resistance and rich color depth.
Combined with PRO HYDRO, our long-lasting hydrophobic topcoat, this package creates an intense mirror-like gloss and irresistible slickness. With proper preparation, PRO 120 will yield up to 10 years of hardened, hydrophobic protection.
FEATURES
- 10 Year Armor Protection
- Diamond Hard Scratch Resistance
- Chrome-like Mirror Gloss & Rich Color Depth
- Extreme Hydrophobic Top Coat
Application Instructions
PRECAUTIONS
- Apply in temperatures between 10-30°C, 50-90°F.
- Apply in a closed, well ventilated indoor area with air humidity not exceeding 70%.
- Wear protective gloves.
- Use fresh applicators & microfiber towels for application of additional layers (do not use previously used towels).
WHAT YOU’LL NEED
- 4 Microfiber Towels
- 3 Applicators
- Protective Gloves
- DIAMOND BODY PREP
APPLICATION TIPS
- If applying in high heat or humidity If applying in high heat or high humidity, lower time between application and removal. Test over a small area to determine appropriate time to let the coating bond to the surface.
- Apply PRO 120 A to body, headlights, rubber, and metal trim.
- Apply PRO 120 B to body, headlights, rubber, and metal trim.
- Apply PRO HYDRO to body, headlights, and metal trim, but not to rubber/plastic.
- PRO 120 A / PRO 120 B / PRO HYDRO: As the coating bonds to the surface a haze will appear. This indicates the coating is ready to remove. If product dries on the surface or is difficult to remove, re-wet the area with more product and immediately buff off.
- IR Curing Lamp:
- Temperature Settings: 50-60°C / 120-140°F
- Distance to Bodywork: 60-70 cm / 24-28 inches
- Time: 15-20 minutes for each section.
INSTRUCTIONS
- Wash, polish and treat areas to be coated with Diamond Body Prep.
- Shake PRO120 A well for 15 seconds.
- Place 15 drops on an applicator and apply to 3-4 sections of the car in a crosshatch fashion.
- Wait 10-15 mins to watch for a haze, then gently buff the treated areas and buff off excess with a low-nap microfiber towel.
- Wait one hour before applying the next layer: PRO 120 B.
- Shake PRO 120 B well for 15 seconds.
- Place 15 drops on an applicator and apply on 1-2 sections of the car in crosshatch fashion. Wait 1-3 mins and buff off excess with a low-nap microfiber towel.
- Wait 1 hour and apply a second coat repeating the process.
- Wait one hour and begin to apply a coat of PRO HYDRO that will give the coating system its amazing hydrophobicity. If curing with IR lamps, do so prior to applying PRO HYDRO.
- Shake PRO HYDRO well for 15 seconds and then apply 15 drops on an applicator. Apply on 3-4 elements of the car in crosshatch fashion.
- Wait up to 7-10 mins watching for a haze to appear and then proceed to gently buff the treated areas with a microfiber towel taking care to remove any excess residue in the process.
- Wait one hour and apply a second coat repeating the process (recommended, not required).
- Wait two hours. Car is ready to drive away!
Diamond Pro 120 Installation Instructions
