The new Optimum Hyper™ Compound Revision #5 has the fastest cut while
finishing like a polish and works much better than any other compound.
Optimum Hyper Compound is the first and only spray compound in the marketplace
that can remove 1,000 grit and deep scratches in seconds while creating a great
finish. Optimum Hyper Compound was designed for professional detailers and auto
body shops to cut through wet sanding marks and deep scratches in one or two
passes. Optimum Hyper Compound offers all the advantages of the Optimum line of
polishes with a long working time and low to no dusting.
The spray-on application provides ease of use and reduces the amount of product
needed to a fraction of the traditional products. 2-3 sprays is enough to cover the
entire pad making the whole pad do the cutting and eliminating dry buffing. The
minor swirls left after using Optimum Hyper Compound can easily be removed with
Optimum Hyper Polish. Optimum Hyper Compound has a long working time to
allow complete paint correction with one application. The residue is easily wiped off
with a dry or damp microfiber towel. Optimum Hyper Compound contains no
silicone oils or wax, so it is completely body shop safe.
Optimum Hyper Compound can be used at any speed on your polisher with a wool
or foam pad. When using a wool buffing pad, the compound will remove 1000 grit
sand scratches and lighter using an Optimum Hyper Wool Foam Pad with Zentool
DA Polisher at a speed of 3-4 or a rotary buffer at 1200-1400 RPM. Faster buffing
speed is not needed with this product. When using a medium or heavy cut foam pad,
the compound will remove 2,000 sand scratches and lighter with Zentool DA
Polisher at speed of 3-4 or a rotary buffer at 1200-1400 RPM. The compound works
more or less aggressively depending on the pad you choose.
Directions:
To remove 1,000 grit or finer sanding marks spray Optimum Hyper Compound on the
Optimum Hyper Wool Foam Pad using Zentool DA Polisher at a speed of 3-4 or a
rotary buffer at 1200-1400 RPM. To remove lighter scratches and swirl marks, spray
Optimum Hyper Compound on an orange waffle or black waffle foam pad using
Zentool DA Polisher at a speed of 3-4 or a rotary buffer at 1200-1400 RPM.
1. Shake Well.
2. Use 2-3 sprays initially to prime the pad. After the initial priming, use two sprays per panel. There is no need to apply additional product since Optimum Hyper Compound has a long working time and will continue on working to remove the
scratches.
3. Use light to medium pressure on the buffer until desired results are achieved.
4. Wipe off residue with a dampened microfiber towel. Follow up with Optimum
Hyper Polish to refine the paint surface before applying Optimum Car Wax.