ULTRA H2O Spray Gun

• (1) ULTRA H2O Spray Gun 
• (1) Single-Hand Auto-lock Quick Coupler
• (1) M15 to M22 Adapter Fitting 
• (1) Female Hose Fitting 
• (1) Roll of Extra Thread Seal Tape 
• (1) Extra Nozzle Holder O-Ring  
• (2) Extra Auto Lock Connector O-Rings  

• Internal Material: Full Stainless Steel 
• Swivel Capabilities: Integrated 360° Stainless Steel Swivel 
• Grip Architecture: Rubberized Comfort Grip Zones 
• Disconnect Style: True Single-Handed Auto-lock Quick Coupler
• Body Type: Impact-Resistant Construction 

Before You Start: 

• Ensure your pressure washer unit is powered off and completely depressurized 
• Select the appropriate adapter fitting (M15 or M22) required for your specific pressure washer hose setup 
• Apply the included thread seal tape to raw threads to guarantee a leak-free, tight seal 
• Do not let the spray gun stay attached to a freezing or pressurized system unmonitored 
• Keep out of direct, extreme impact scenarios to protect the outer composite housing 
• Always test on a small hidden area first 

Application: 

• Make sure the pressure washer water supply is turned off and the high-pressure hose is cool to the touch 
• Thread or quick connect your hose fitting onto the integrated 360° stainless steel swivel at the base of the handle until securely locked 
• Insert your preferred spray tip or foam cannon directly into the single-handed auto-lock quick coupler until it clicks into place 
• Store your secondary or favorite auxiliary nozzles directly into the built-in nozzle holder on the gun body for quick access 
• Ensure Water and power to your pressure washer is turned ON 
• Squeeze the buttery smooth trigger to initiate spray gun and test away from vehicle  
• Engage the spring-loaded trigger lock during extended spraying sessions to eliminate grip tension and hand fatigue 
• Release the trigger lock, bleed the pressure lines completely when the wash is finished, and store the gun cleanly 

Warranty Coverage 

The Rag Company warrants that the Ultra Air Blaster will be free from defects in materials and workmanship for 90 days from the date of purchase, under normal use and operating conditions. 

If a defect arises during the warranty period, The Rag Company will, at its discretion: 

• Repair the product, 
• Replace it with an identical or equivalent model, or 
• Issue store credit for the original purchase price. 

What’s Not Covered 

This warranty does not cover: 

• Damage from misuse, impact, or abuse 
• Operation above or below recommended PSI (90–100 PSI) 
• Clogging from unfiltered or contaminated air 
• Normal wear and tear (e.g., trigger wear, nozzle discoloration) 
• Use in commercial or industrial settings 
• Modifications or unauthorized repairs 
• Accidental drops or tool damage from storage/mishandling 

Filing a Warranty Claim 

To file a claim, contact support@theragcompany.com and provide: 

1. Proof of purchase 
2. Description of issue 
3. Photos and/or video of the defect 
4. Confirmation of operating pressure and use conditions 

Limitations of Liability 

This warranty is non-transferable and applies only to the original purchaser. The Rag Company is not responsible for incidental or consequential damages arising from product failure. 

This limited warranty gives you specific legal rights; you may also have additional rights depending on your jurisdiction.