Wheel Coating - Case
Armour Wheel Quartz Coating is a high-performance solution built to protect and elevate the look of your wheels. With a 76% SiO2 formula, it delivers heat resistance and durability against brake dust, road grime, and daily abuse. The coating forms a tough, long-lasting barrier that repels contaminants and makes wheel cleaning easier and faster. It’s safe for use on a wide range of finishes including anodized, chrome, painted, powder coated, clear-coated aluminum, and matte surfaces. With protection that can last over 15,000 miles or more than a year depending on driving conditions, Armour Wheel Quartz Coating gives you a reliable, low-maintenance way to keep your wheels looking sharp.
Why You’ll Love It:
- Packed with 76% SiO2 for serious durability and high solids protection
- Shields wheels from brake dust, road grime, and everyday abuse
- Withstands high heat to keep your wheels protected in all conditions
- Forms a long-lasting barrier that makes cleaning fast and easy
- Reduces buildup so your wheels stay cleaner for longer
- Safe for use on anodized, chrome, painted, powdercoated, clear-coated aluminum, and matte finishes
- Compatible with nearly every wheel type, from factory to custom setups
- Delivers protection that can last over 15,000 miles or more than a year
- Cuts down on maintenance time without compromising performance
What’s Included:
- 30ml Armour Wheel Quartz Coating w/ Dropper Top
- (1) Mini Microfiber Coating Application Pad
- "How To" Direction Card
How to Use
Before You Start:
- Shake well before use and avoid applying in direct sunlight
- Use gloves, eye protection, and a mask if working in an enclosed space
- Test a small area first to confirm proper flash time
- Expect a two-to-three-minute wipe off in cooler temps and one to two minutes in warmer temps
- Shelf life is twelve months unopened and best used within thirty days after opening
Prep:
- Clean the wheel surface using ADS Wheel Cleaner
- Remove embedded contamination with a clay bar or synthetic clay mitt
- If needed, polish the wheels to correct swirls and enhance gloss
- Wipe thoroughly with Armour Panel Prep to remove polishing oils
- If you skip polishing, wipe with Panel Prep twice for a fully clean surface
Application:
- Prime your applicator with three lines of product for the first wheel and apply in a crosshatch pattern for even coverage
- Allow the coating to set for one to three minutes until light hazing appears, adjusting time based on how easily it levels
- Level with a short nap towel using small circular motions, then follow with a plush towel to clear any dark or cloudy high spots
- Flip to a fresh section of your towel for each wheel and apply a second layer after one to two hours for maximum durability
Aftercare:
- Allow at least 12 hours for initial cure
- After 4 hours, apply Armour AMPLIFY or Ceramic Spray Sealant for added protection during curing
- Vehicle can get wet after 12 hours
- Avoid washing or exposing to chemicals for 7 days
Product Specs
· Solids Content: 76% (SiO2) at 99.9% Purity
· Hardness: >9H (Who Cares)
· Chemical Resistance: Extreme, 0-13ph
· Durability: 15,000+ miles or 1+ years real world tested (lab tested for over double, our competitors would claim this)
· Film Thickness: ~3-4 micron
· Flash Time: 1-5 minutes (2-3 on average)
· Coverage: 10-15ml per wheel set
· Water Contact Angle: 110°
· Working Temperatures: 40F to 100F.
· Applicable Surfaces: Wheels
· Shelf Life: 12 months, use within 7 days of opening for best application experience
Safety Information
Warranty
Your satisfaction is our priority. If you are not completely happy with the performance of your TRC consumable product, you may return it within 30 days of purchase for a full refund or exchange — even if it has been used, provided it was used as intended.
