Wheel Coating
Armour Wheel Quartz Coating is a high-performance solution built to protect and elevate the look of your wheels. With a 76% SiO2 formula, it delivers heat resistance and durability against brake dust, road grime, and daily abuse. The coating forms a tough, long-lasting barrier that repels contaminants and makes wheel cleaning easier and faster. It’s safe for use on a wide range of finishes including anodized, chrome, painted, powder coated, clear-coated aluminum, and matte surfaces. With protection that can last over 15,000 miles or more than a year depending on driving conditions, Armour Wheel Quartz Coating gives you a reliable, low-maintenance way to keep your wheels looking sharp.
Why You’ll Love It:
- Packed with 76% SiO2 for serious durability and high solids protection
- Shields wheels from brake dust, road grime, and everyday abuse
- Withstands high heat to keep your wheels protected in all conditions
- Forms a long-lasting barrier that makes cleaning fast and easy
- Reduces buildup so your wheels stay cleaner for longer
- Safe for use on anodized, chrome, painted, powdercoated, clear-coated aluminum, and matte finishes
- Compatible with nearly every wheel type, from factory to custom setups
- Delivers protection that can last over 15,000 miles or more than a year
- Cuts down on maintenance time without compromising performance
What’s Included:
- 30ml Armour Wheel Quartz Coating w/ Dropper Top
- Mini Microfiber Coating Application Pad
- "How To" Direction Card
How to Use
Before You Start:
- Shake well before use and avoid applying in direct sunlight
- Use gloves, eye protection, and a mask if working in an enclosed space
- Test a small area first to confirm proper flash time
- Expect a two-to-three-minute wipe off in cooler temps and one to two minutes in warmer temps
- Shelf life is twelve months unopened and best used within thirty days after opening
Prep:
- Clean the wheel surface using ADS Wheel Cleaner
- Remove embedded contamination with a clay bar or synthetic clay mitt
- If needed, polish the wheels to correct swirls and enhance gloss
- Wipe thoroughly with Armour Panel Prep to remove polishing oils
- If you skip polishing, wipe with Panel Prep twice for a fully clean surface
Application:
- Prime your applicator with three lines of product for the first wheel and apply in a crosshatch pattern for even coverage
- Allow the coating to set for one to three minutes until light hazing appears, adjusting time based on how easily it levels
- Level with a short nap towel using small circular motions, then follow with a plush towel to clear any dark or cloudy high spots
- Flip to a fresh section of your towel for each wheel and apply a second layer after one to two hours for maximum durability
Aftercare:
- Allow at least 12 hours for initial cure
- After 4 hours, apply Armour AMPLIFY or Ceramic Spray Sealant for added protection during curing
- Vehicle can get wet after 12 hours
- Avoid washing or exposing to chemicals for 7 days
Product Specs
- Solids Content: 76% (SiO2) at 99.9% Purity
- Hardness: >9H (Who Cares)
- Chemical Resistance: Extreme, 0-13ph
- Durability: 15,000+ miles or 1+ years real world tested (lab tested for over double, our competitors would claim this)
- Film Thickness: ~3-4 micron
- Flash Time: 1-5 minutes (2-3 on average)
- Coverage: 10-15ml per wheel set
- Water Contact Angle: 110°
- Working Temperatures: 40F to 100F.
- Applicable Surfaces: Wheels
- Shelf Life: 12 months, use within 7 days of opening for best application experience
Safety Information
Warranty
Within 30 days from purchase: TRC will replace items damaged in shipping upon inspection of photos. Opened, used, or partially used products excluded, as well as any degradation from storage or environmental exposure; customer dissatisfaction with scent, color, or consistency; misuse.
After 30 days: no warranty applies.
Note: No manufacturer warranty is provided beyond shipping damage replacement. No guarantees are made for product longevity, performance, or fitness for a particular purpose.
